A replica Rolex 14060 is a copy of the no-date Submariner, a watch Rolex made from 1990 to 2001. The 14060 has a 40mm case, a unidirectional bezel, and no date window. Replicas vary in quality. The best ones match the case profile, dial layout, and bezel action of the original. This guide explains what to inspect before you buy.
What Defines the Rolex 14060
The 14060 replaced the 5513. It uses a 300m water-resistant case, a sapphire crystal, and an aluminum bezel insert. Early models have tritium dials and lug holes. Later models use Super-LumiNova and solid lugs. The case has a slim profile compared to modern Submariners. The bezel turns with 120 clicks. The crown is a Twinlock, not a Triplock. These details matter when you judge a replica.
How to Inspect a Replica 14060
- Check the case shape. The lugs should curve down and the crown guards should have a slight taper.
- Measure the case. It should be 40mm wide and about 12.5mm thick.
- Turn the bezel. It should move in one direction with firm clicks and no back play.
- Look at the dial. The markers should be round or rectangular, and the text should sit below the center.
- Examine the hands. The hour hand should have a Mercedes symbol and the minute hand should reach the chapter ring.
- Inspect the crown. It should screw down and have the Rolex coronet stamped on the end.
- Test the movement. A good replica uses a smooth sweeping seconds hand, not a ticking one.
- Check the water resistance. Do not swim with a replica unless a watchmaker has tested it.
Common Flaws in Replica 14060 Watches
- Wrong case thickness or lug width.
- Bezel insert font that is too thick or too thin.
- Dial text that is too large or placed too high.
- Crown guards that are too sharp or too rounded.
- Movement that ticks instead of sweeps.
- Bracelet that feels light or has sharp edges.
Movement Choices
Replica 14060 watches use several movements. The most common are Asian clones of the ETA 2824 or the Rolex 3130. A reliable clone runs at 28,800 beats per hour. That gives a smooth sweep. Some cheap replicas use a 21,600 bph movement. That sweep is less smooth. Ask the seller which movement is inside. A good movement adds to the cost but also to the lifespan.
Price Range
Prices for a replica 14060 run from about $80 to $500. Low-cost models often have flaws in the case and dial. Mid-range models fix those flaws but may use a basic movement. High-end replicas use better steel, sapphire crystal, and a cloned movement. They can cost $400 or more. No replica matches a genuine Rolex in materials or finishing. Set your budget and know what you are buying.
Before You Buy
Ask for clear photos of the case, dial, and movement. Request a video of the seconds hand. Check the seller's return policy. Read reviews from other buyers. If the price seems too low, the watch likely has problems. A replica 14060 can be a fun watch, but treat it as a copy, not an investment.